Bubble free solution floor level showers featuring a fitted in sealed floor drain a supplementary waterproof coating and a predefined slope that require fat less work on and building site and save the wet room fitting specialist a lot of time. Let’s demonstrate installation of the wet room drain with horizontal drain. Put down edge insulating strip to avoid creating an acoustic bridge.
Install the base element in a dry condition and mark out the position of drain. Pipe can now be modified to the required length and drain can be mounted. Before the filling process put the protective cover in place so that no dirt ends up in the drain. The opening is filed to the right height with the bonded leveling compound.
Check the dimension and smooth to the required height. Before the wet room floor is placed in the correct position once again confirm that everything is okay. Remove the protective over and place element once again in the correct positon for confirmation if it does fit properly. If doesn’t fit, now is the time to correct the position at the drain. Now, fit the seal ring from above into the plastic frame channel and screw down the shower base with the seal insert, tighten it manually once again.
It’s important that the thin layer mortar covers all the underside of the element. First apply a concat layer BB610 to te sides which will be places against the wall with the building boards and the element is inserted flas into the recess. Check the evenness have the installation using a spirit level. Ten seal the joins ad the tray element tot he walls using bb10 yet again and then smoothing trowel.
Allow the tile adhesive to cure for at list 12 hours under a little pressure for example with the help of tile bundles. Once the tile adhesive is heartened sufficiently the isolating script can be cut tot he correct height. A base structure for wash basing can be easily created from building board. Seal shower board, wall boards with primo and screed. the joining surface can be sealed using a dry flex or flexible waterproofing grout.
Once the sealant has hardened after about five hours tiling can commence.
Tanking walls and floors as a part of bathroom installation or walk in room. Different located drainage shapes available.
Our wet room renovation video has over 24 000 views on YouTube!